Intended use of Wandelbots NOVA
Wandelbots NOVA with physical robots is only intended for the intended use which is specified on this page. All instructions and safety instructions in this documentation must be followed when using Wandelbots NOVA. Wandelbots NOVA must not be used as a replacement for the original robot controller.
Operating mode
Wandelbots NOVA is used exclusively for teaching in robot operating mode “Manual mode with reduced speed”.
Supported robot controllers and models
Wandelbots NOVA only supports the following robot controllers and robot models:
Omnicore
IRC5
IRC5 compact
IRB 1010
IRB 1100-4/0.475
IRB 1100-4/0.58
IRB 1200
IRB 1300
IRB 1300 0.9/11
IRB 1300 1.15/10
IRB 1300 1.40/7
IRB 1300 1.40/12
IRB 1600 1.20/6
IRB 1600 1.20/10
IRB 1600 1.45/6
IRB 1600 1.45/10
IRB 2600 1.65/12
IRB 2600 1.65/20
IRB 2600 1.85/12
IRB 2600ID 185 15
IRB 2600ID 200 8
IRB 4600 2.50/20
IRB 4600 2.05/45
IRB 4600 2.05/60
IRB 4600 2.55/40
IRB 6730-210/3.1
IRB 6730-240/2.9
Safety
The use of Wandelbots NOVA is only permitted after the safety controller has been configured.
When actively controlling the robot with Wandelbots NOVA, constant visual contact with the robot’s working area must always be ensured. The distance between the HMI and the robot must not exceed 32.80 ft.
Product condition
All Wandelbots NOVA components must always be in faultless condition.
Allowed amount of users
Wandelbots NOVA is only to be operated by 1 person.
Software version
Wandelbots NOVA is only to be used with the latest Wandelbots NOVA software version.