Connect physical robots

⚠️ caution

Danger in case of insufficient qualification of users
People can be injured if unqualified user groups set up the physical robot environment.

Only qualified user groups designated by the operating company may set up the physical robot environment.
Keep unqualified user groups away from the area of risk.

Preparing a physical robot for the use of Wandelbots NOVA is a task that requires a certain level of expertise. The setup instructions provided for the supported brands do not replace a thorough understanding of the robot manufacturer's original operating instructions.

If a higher experience level, e.g. admin user, is recommended to complete the step, the following label will be displayed next to the header:

Admin

Remember to read through and comply to the provided safety instructions. If you have remaining questions, contact Wandelbots GmbH Customer Support.

Setup instructions

The setup instructions are tailored to the supported brands but all respect the following structure:

Supported models of the brand,
Preparing the robot for the connection with Wandelbots NOVA.
Physically connecting the IPC to the robot controller.
Configuring the IPC to establish communication with the robot controller.
Troubleshooting common issues that may arise during the setup process.

Click on the respective button below to start!

ABB FANUC KUKA UR Yaskawa

Or go back to the introduction

Back to introduction

Cell setup ABB